If you want to stop XP from putting negative entries into cache, you may make this improvement in your registry.

1. Goto HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ Dnscache\Parameters 2. Build A dword that is new value NegativeCacheTime (the worth is situation sensitive) and provide it a value of 0 (this is certainly a ZERO).

Since all three computers are impacted and I also assume they all are attached to the modem that is same router, i do believe your trouble lies with one of these. Something simple you can test would be to power down both your modem and router for just one minute. Turn them down, or unplug them from AC if you have no on / off switch. After a full minute, restart them by powering them backup. This will reset them. Does this have impact on your trouble?

Additionally, maybe you have tried connecting your ethernet cable directly through the modem to 1 regarding the PCs, bypassing the router? If every thing works fine once you’ve done that, then chances are you understand the problem is utilizing the router and never the modem.

Which type of Linksys router can you have? Perhaps you have upgraded the firmware for this recently? From the router that is main web web page, what’s the MTU set to?

The battery was had by me from the motherboard die, so that the clock didn’t work. This kept me personally from getting on the net and provided protection warnings. Until we replaced the battey I would personally start up then right click the clock to manually set clock to current date this allowed me to log in internet.

They can can get on the net. Simply particular websites don’t load for him.

We have a router that is d-link works on the air-card for connecting with. Yesterday evening it had the exact same dilemmas you are explaining right here. I just had success by removing the application program through the computer and reinstall the application. I became in a position to get into the site under consideration by setting up the air-card in to the computer however with the router i really couldn’t arrive at two sites that are different. After reinstalling the application I became in a position to get every where i needed to. I’ve two various computers, Both have actually Vista Residence Premium and both had the exact same issue till We reinstalled the program. We dumped most of the bookmarks, cookies and all sorts of the settings back into standard. Possibly this may assist but i do believe there is certainly a trojan or worm that pinged my router night. This is certainly last have experienced an added individual have a similar issue to my forum site however the technology wasn’t capable of getting them online yet!! We delivered this to your forum technology, possibly it will assist them to get online.

Many thanks all so much for the suggestions that are excellent!

Listed here is an improvement: i obtained out a mature laptop with Windows98 about it and attempted to head to these sites, utilising the exact exact same connection that is wireless my other computer systems. Well — I became in a position to achieve web sites fine!

Does not that seem strange?

Additionally, we attempted attaining the web internet sites with the IP details shown in Edward’s post, and they could be reached by me however they didn’t load precisely (no images).

I did so notice another thing that is weird may or may possibly not be related? Whenever I’m taking a look at a number of the style and formatting choices within Outlook, it shows me personally the font in english, as well as in something which appears arabic? Could this in just about any method be associated?

Other updates: My HOSTS file has absolutely absolutely nothing inside it. I’ve rebooted my router, my modem not to mention the PCs times that are numerous. My clock is operating fine. We examined with my ISP and no filtering is had by them.

To make certain that’s the newest. Your assistance is a lot valued!

And how about the material we asked or suggested you in my own post?

Something that generally seems to assist could be the environment in Firefox or IE7, and thats checking the actual quantity of storage space in your browser cache. Should always be around 50mb lower is way better. Dump the catch and find out whenever you can link.

While emptying the web web browser cache or deleting temporary internet files is definitely a good clear idea, as it is establishing how big the cache to

80 MB or less, i can not observe that being the nagging issue right here as it’s affecting all three computer systems and not one.

We reduce to 50mb and dumped the cache. We took down a firewall, Vista firewall I experienced it about per week. I do not think it was done by it but one thing had to replace the pc pc pc software settings in th router. A pal on another web site was attempting for a fortnight to make it to the forum whenever their computer died in which he purchased a brand new one with vista and their router would not manage the vista and they’re saying this really is a incompatibility problem with older routers and vista. They do say an ongoing solution pack is originating down quickly that will assist with this specific problem. Now, in regards to what we have been suppose to then do until, I’m not sure??

Sorry that firewall should really be Vista Firewall control 1.1

My 3 pcs and 1 laptop being obstructed by an online site. We also use linksys modem+router+wireless. I cannot get certain site also making use of cable or cordless. If someone used to solve this prob am I able to discover how?

Simply put, does that point out an XP issue somehow?

But, to resolve your questions — Linksys Wireless G Broadband Router 2.4 ghz. Never have upgraded firmware, did not understand we needed to! Forgive my ignorance, but I do not understand what are the primary router set up page.

BTW — i will be making use of IE6.

Have actually you attempted bypassing the router completely like we recommended? You need to take the Ethernet cable that goes from your own modem to your router and plug it straight into the Computer that is closest. You will need to free up the jack on your computer needless to say by unplugging the cable this is certainly presently going from your own router to Computer. You need to try this you definitively if your router is part of the problem because it will tell. If pages load fine whenever bypassing the router, you then know your PCs are fine.

There are lots of issues that are known your router with respect to the variation and firmware getting used. Consider the number that is serial in the base associated with the router and you will figure out which variation it really is by matching up the very first four figures aided by the information available on this web page: http: //www. Wrtrouters.com/guides/findversion/

It is possible you’ll want to upgrade the firmware in your router, but more about that later on.

The info that is following for whenever your Computer continues to be linked to your router.

I am just a little amazed you could have never ever gone to your router setup web web web page. In your online web browser, kind the next into the target club: 192.168.1.1 or http: //192.168.1.1 if you like. You’re going to be prompted for the account. If you have never ever configured it prior to, I think the standard is to go out of the username blank and type in “admin” for the password. If that does not work properly, decide to try admin that is typing into both industries.

Thoughts is broken in the Basic Setup web page, close to the top you ought to start to see the environment for “MTU”. It almost certainly will soon be set to “Auto”. Pick “Manual” from the drop-down menu and alter the worthiness in the industry below it to 1450. Save your settings using the key in the bottom associated with web web page. Does this have any impact on your on line browsing? How about 1460, 1400 and https://datingmentor.org/her-review/ sometimes even 1300? Then just set it back to Auto as well if none of these have any effect, you can change the value to 1492 if you’re ISP is DSL, or 1500 if it’s Cable, but.

Towards the top right corner for the router setup web page, just just what Firmware Version does it state you might be using?